RACOmatic® Heavy duty electric actuator K1N7 - 148448
Stroke (mm) | 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 |
a3 (mm) | 745 | 945 | 1145 | 1345 | 1545 | 1745 | 1945 | 2145 | 2345 | 2545 |
Drive type | Thrust (kN) | Rod speed (mm/s) | Motor power (kW) | Motor voltage (V) | Frequency (Hz) | Motor current (A) | Converter (kW) |
---|---|---|---|---|---|---|---|
Ball screw | 30.00 | 6 - 55 | 2.20 | 400 | 5 - 50 | 5.30 | 3.0 |
<<< back to list
Accessories type M
Configuration A
Two adjustable End Positions
- Accurate approach to two adjustable end positions
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the preset maximum thrust
- Position signal Output
- Limitation of adjustment options for position parameters as a safety Feature
- Speed adjustment via potentiometer
- Fault output
Configuration C
Analog Input for variable position
- Infinite variable stroke Position
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the specified maximum thrust
- Position signal Output
- Digital output "position reached"
- Speed adjustment via potentiometer
Configuration D
Thrust controlled Electric Actuator
- Infinite variable stroke Position
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the specified maximum thrust
- Position signal Output
- Digital output "position reached"
- Speed adjustment via potentiometer
Configuration E
Variable control via Field Bus interface
- Control of operating parameters (acceleration, thrust, position)
- Switchable control parameters, even under operating conditions
- Integration via field bus Interface
- Readout of operating parameters in digital Format
- Thrust limitation can be adjusted up to the maximum thrust
- Fault output
Configuration B
8 selectable Positions
- Precise approach to 8 selectable positions
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the specified maximum thrust
- Position signal Output
- Limitation of adjustment options for position parameters as a safety Feature
- Speed adjustment via potentiometer
- Fault output
Configuration F
Synchronisation control
- Control of operating parameters (acceleration, thrust, position)
- Switchable control parameters, even under operating conditions
- Integration via field bus Interface
- Readout of operating parameters in digital Format
- Thrust limitation can be adjusted up to the maximum thrust
- Fault output
EPS CAN
- non-contact, wear-free multiturn sensorsystem
- digital resolution < 0,01mm
- integrated evaluation of thermal contact / PTC thermistor sensor
- 2 end positions (relay outputs)
- 2 intermediate positions (npn transistor outputs 24 VDC)
- overload shut-down
- parameter setting using PC Windows software - RACOmatic® tool
- analogue position feedback
- CANopen interface
Accessories type N
Configuration A
Two adjustable End Positions
- Accurate approach to two adjustable end positions
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the preset maximum thrust
- Position signal Output
- Limitation of adjustment options for position parameters as a safety Feature
- Speed adjustment via potentiometer
- Fault output
Configuration C
Analog Input for variable position
- Infinite variable stroke Position
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the specified maximum thrust
- Position signal Output
- Digital output "position reached"
- Speed adjustment via potentiometer
Configuration D
Thrust controlled Electric Actuator
- Infinite variable stroke Position
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the specified maximum thrust
- Position signal Output
- Digital output "position reached"
- Speed adjustment via potentiometer
Configuration E
Variable control via Field Bus interface
- Control of operating parameters (acceleration, thrust, position)
- Switchable control parameters, even under operating conditions
- Integration via field bus Interface
- Readout of operating parameters in digital Format
- Thrust limitation can be adjusted up to the maximum thrust
- Fault output
Configuration B
8 selectable Positions
- Precise approach to 8 selectable positions
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the specified maximum thrust
- Position signal Output
- Limitation of adjustment options for position parameters as a safety Feature
- Speed adjustment via potentiometer
- Fault output
EPS CAN
- non-contact, wear-free multiturn sensorsystem
- digital resolution < 0,01mm
- integrated evaluation of thermal contact / PTC thermistor sensor
- 2 end positions (relay outputs)
- 2 intermediate positions (npn transistor outputs 24 VDC)
- overload shut-down
- parameter setting using PC Windows software - RACOmatic® tool
- analogue position feedback
- CANopen interface
lubrication
- long-life grease
- long-life grease acc. to Water Hazard Class 1 & 2
- food-grade grease
- low temperature grease
Accessories type T
Configuration A
Two adjustable End Positions
- Accurate approach to two adjustable end positions
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the preset maximum thrust
- Position signal Output
- Limitation of adjustment options for position parameters as a safety Feature
- Speed adjustment via potentiometer
- Fault output
Configuration C
Analog Input for variable position
- Infinite variable stroke Position
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the specified maximum thrust
- Position signal Output
- Digital output "position reached"
- Speed adjustment via potentiometer
Configuration D
Thrust controlled Electric Actuator
- Infinite variable stroke Position
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the specified maximum thrust
- Position signal Output
- Digital output "position reached"
- Speed adjustment via potentiometer
Configuration E
Variable control via Field Bus interface
- Control of operating parameters (acceleration, thrust, position)
- Switchable control parameters, even under operating conditions
- Integration via field bus Interface
- Readout of operating parameters in digital Format
- Thrust limitation can be adjusted up to the maximum thrust
- Fault output
Configuration B
8 selectable Positions
- Precise approach to 8 selectable positions
- Adjustable acceleration and deceleration ramps
- Thrust limitation up to the specified maximum thrust
- Position signal Output
- Limitation of adjustment options for position parameters as a safety Feature
- Speed adjustment via potentiometer
- Fault output
Configuration F
Synchronisation control
- Control of operating parameters (acceleration, thrust, position)
- Switchable control parameters, even under operating conditions
- Integration via field bus Interface
- Readout of operating parameters in digital Format
- Thrust limitation can be adjusted up to the maximum thrust
- Fault output
EPS CAN
- non-contact, wear-free multiturn sensorsystem
- digital resolution < 0,01mm
- integrated evaluation of thermal contact / PTC thermistor sensor
- 2 end positions (relay outputs)
- 2 intermediate positions (npn transistor outputs 24 VDC)
- overload shut-down
- parameter setting using PC Windows software - RACOmatic® tool
- analogue position feedback
- CANopen interface
Forgot your password?
Please enter your username or email address. Instructions for resetting the password will be immediately emailed to you.
Create User-account
As a registered user you have access to restricted technical documentations, CAD-files as well as 3D solids.
Click her in order to create an user-account: Create User-account
Please read our notes on privacy data protection.